Nortel BSR222, Configuration, Page: 336 / 451

336 Chapter 18 Remote management screens
NN47922-500
a Click REMOTE MGMT . Write down the name of the certificate
displayed in the Server Certificate field.
b Click CERTIFICATES . Find the certificate that was displayed in the
Server Certificate field and check its Subject column. CN stands for
certificate’s common name (see Figure 119 on page 340 for an example).
Use this procedure to have the Business Secure Router use a certificate with a
common name that matches the Business Secure Router’s actual IP address. You
cannot use this procedure if you need to access the WAN port and it uses a
dynamically assigned IP address.
a
Create a new certificate for the Business Secure Router that uses the IP
address (of the Business Secure Router’s port that you are trying to
access) as the certificate’s common name. For example, to use HTTPS to
access a LAN port with IP address 192.168.1.1, create a certificate that
uses 192.168.1.1 as the common name.
b Go to the remote management WWW screen and select the newly created
certificate in the Server Certificate field. Click Apply .
Logon screen
After you accept the certificate, the Business Secure Router logon screen appears.
The lock displayed in the bottom right of the browser status bar denotes a secure
connection.