Nortel BSG12aw 1.0, Configuration Manual

Page: 107 / 200

LAN advanced configuration 107
Configuration Guide
Variable definitions
The following table describes the variables and values for configuring the WEP settings for
WLAN.
Wireless multimedia configuration parameters
The following section describes the parameters for advanced configuration of the Wireless
Multimedia (WMM) located at
Configuration,
LAN, Wireless, WMM
tab.
Variable Value
SSID Select the SSID you require to configure WEP settings.
Key Index The key used for data encryption.
Options:
1
2
3
4
If you want to assign the selected key index as the default value, you must
select the Set this as default WEP key.
Set this as default WEP Key If you select this box, you can configure the selected key index as the
default value.
The default for the first configured WEP is checked.
The default for subsequent configured WEPs is unchecked.
Key Type The required WEP key type, which is the default secret key type.
Options:
Hex—the manual string is a string of HEX numbers
ASCII—the pass-phrase is an ASCII character string.
Key Size The required key size.
Options:
64 Bit
128 Bit
152 Bit.
The default value is 64 Bit.
Key Value The WEP key value.