Nortel BCM50e, Configuration

Page: 41 / 311

Chapter 2 Introducing the SMT 41
BCM50e Integrated Router Configuration - Advanced
Main menu
After you enter the password, the SMT displays the Business Secure Router Main
Menu , as shown in Figure 4 . Not all models have all the features shown.
Move the
cursor
[ENTER] or [UP] or
[DOWN] arrow keys
Within a menu, press [ENTER] to move to the
next field. You can also use the [UP] or [DOWN]
arrow keys to move to the previous or the next
fields, respectively.
When you are at the top of a menu, press the
[UP] arrow key to move to the bottom of a menu.
Entering
information
Fill in, or press
[SPACE BAR], then
press [ENTER] to
select from choices.
There are two types of fields. The first requires
you to type in the appropriate information. The
second allows you to cycle through the available
choices by pressing [SPACE BAR].
Required fields <? > All fields with the symbol <?> must be filled in
order be able to save the new configuration.
N/A fields <N/A> Some of the fields in the SMT will show a <N/A>.
This symbol refers to an option that is Not
Applicable.
Save your
configuration
[ENTER] Save your configuration by pressing [ENTER] at
the message “Press ENTER to confirm or ESC to
cancel”. Saving the data on the screen will take
you, in most cases, to the previous menu.
Make sure you save your settings in each screen
that you configure.
Exit the SMT Type 99, then press
[ENTER].
Type 99 at the main menu prompt and press
[ENTER] to exit the SMT interface.
Table 2 Main menu commands
Operations Keystrokes Descriptions