manualshive.com logo in svg

Nortel 8300 Series, Reference Manual, Page: 39 / 220

Share
Download
Nortel 8300 Series Reference Manual Download Page 39

39

System Messaging Platform Reference Guide

 

Chapter 4 
SMP log error messages

This chapter lists SMP error messages in alphabetical order. Each message has a 
severity level, description, synopsis, and a recommended action.

Numeric Messages

Message

<value> card in slot <value> not communicating

Severity

WARNING

Description

This message specifies that a card failed because it has no communication with 
the master CPU.

Synopsis

N/A

Action

Re-insert or replace the card.

Message

<value> failed

Severity

FATAL for CP Card, ERROR for IO Card

Description

The string provides the message that results in failure during the chassis 
initialization.

Synopsis

N/A

Action

System initialization failed for some reason. Please reboot and try again. If the 
problem persists, try it with a different set of cards.

Message

<value> failed for <value>

Severity

FATAL for CP Card, ERROR for IO Card

Description

The string provides the message that results in failure during chassis initialization 
for a particular device number.

Synopsis

N/A

Action

System initialization failed for some reason. Please reboot and try again. If the 
problem persists, try it with a different set of cards.

Summary of Contents for 8300 Series





























































































































































































































Reviews:

No comments