Nortel 8300 Series, Reference Manual, Page: 33 / 220

33
System Messaging Platform Reference Guide
Chapter 3
Setting up SMP logs using the NNCLI
This chapter includes the following topics that describe how to set up SMP logs
using the NNCLI:
Displaying logs by file name, category, severity, and CPU
To display log information by file name, category, severity, or CPU, enter the
following NNCLI command from the
User EXEC mode:
show logging file [tail] [name-of-file < value >] [category
< value >] [severity < value >] [CPU < value >] [save-to-file
< value >]
Topic Page
Displaying logs by file name, category, severity, and CPU 33
Defining transfer criteria for the log file 35
Configuring the remote host address and file name for log transfer 36
Logging system messages to the PCMCIA 37
Ending the logging of system messages on the PCMCIA 37
Table 9
Display log information by file name, category, severity and CPU (Sheet
1 of 2)
show logging file
followed by:
tail Displays the file from tail.
name-of-file < value >
Displays the valid logs from the file name specified by
the user. This command cannot be used on the current
log file (the file into which the messages are currently
logged). Replace
<value> to specify the source file
name, for example: /pcmcia/logcopy.txt .