manualshive.com logo in svg

Nortel 8300 Series, Reference Manual, Page: 206 / 220

Share
Download
Nortel 8300 Series Reference Manual Download Page 206

206

Chapter 4 SMP log error messages

316806-C

 

U Messages

Message

Unable to Allocate memory for log filter entry

Severity

INFO

Description

This message is generated when the system is unable to allocate memory for the 
log filter entry.

Synopsis

N/A

Action

N/A

Message

Unable to Allocate memory for log filter string

Severity

INFO

Description

This message is generated when the system is unable to allocate memory for the 
log filter string.

Synopsis

N/A

Action

N/A

Message

unable to create file: <filename>

Severity

WARNING

Description

This message is generated when the system is unable to open the engboot file 
which stores the number of the booted SNMP engine.

Synopsis

N/A

Action

N/A

Message

unable to create profile semaphore

Severity

ERROR

Description

This message is generated when the system is unable to create binary 
semaphore.

Synopsis

N/A

Action

Reboot the switch and contact the customer service team if the problem persists.

Message

unable to get the IpRec for Addr <ipaddr>

Severity

ERROR

Description

This message is generated if IP interface cannot be obtained from the IP address.

Synopsis

Unable to get the interface from the IP address.

Action

Contact customer support for further troubleshooting.

Summary of Contents for 8300 Series





























































































































































































































Reviews:

No comments