manualshive.com logo in svg

Nortel 8300 Series, Reference Manual, Page: 195 / 220

Share
Download
Nortel 8300 Series Reference Manual Download Page 195

Chapter 4 SMP log error messages

195

System Messaging Platform Reference Guide

 

Message

syncTaskDelete: IPC semDelete <value> currentId <value>

Severity

FATAL

Description

This message is generated when the IPC semaphore semId from the current Id 
fails.

Synopsis

N/A

Action

Reboot the switch and contact the customer service team if the problem persists.

Message

System Arp Table Full

Severity

ERROR

Description

This message is generated when an entry is about to be added to the ARP table 
and there is no empty slot available.

Synopsis

Cannot add new entry in ARP table.

Action

Delete unwanted ARP entries from the table.

Message

System clock faster than real-time clock. Problem fixed.

Severity

ERROR

Description

This message is generated when the system clock is faster than a real-time clock. 

Synopsis

N/A

Action

N/A

Message

System out of memory

Severity

FATAL

Description

This message is generated when the system is out of memory.

Synopsis

Insufficient memory.

Action

If the problem persists, contact customer service.

T Messages

Message

Table syncing failed for ntp key entries

Severity

ERROR

Description

HA-syncing for NTPkey table failed.

Synopsis

Try using the same releases on both the boxes. Else, contact customer support

Action

N/A

Summary of Contents for 8300 Series





























































































































































































































Reviews:

No comments