manualshive.com logo in svg

Nortel 8300 Series, Reference Manual

Introducing the Whirlpool 8300 Series, a high-performance home appliance designed for effortless living. Access the comprehensive Use and Care Manual for free download at manualshive.com, offering step-by-step instructions and maintenance tips to maximize the product's longevity and efficiency. Experience unrivaled convenience and reliability with this remarkable appliance.

Share
Download
background image

Preface

13

System Messaging Platform Reference Guide

 

You must reboot the switch for this change to take effect. After you reboot the 
switch, access the NNCLI using Telnet, rlogin, or the local console port. You can 
log in to the switch using your password and the default privilege password 

nortel

.

Use the following commands to:

•

log in to the software using the default user name and password

•

access Global configuration mode

Login: 

xxxxx

Password: 

xxxxx

Passport-8310:5> 

enable

Password: 

nortel

Passport-8310:5# 

configure terminal

Passport-8310:5(config)#

Returning to the CLI

To switch from the NNCLI to the CLI, enter the following commands:

Passport-8310:5(config)# 

no boot flags nncli

Passport-8310:5(config)# 

exit

Passport-8310:5(config)# 

save boot

You must reboot the switch for this change to take effect.

Note: 

The config.cfg file for the CLI and the config.cfg file for the 

NNCLI are not compatible. If you decide to change the CLI mode to 
NNCLI, or the reverse, you must use the config.cfg file for the selected 
mode.

Summary of Contents for 8300 Series





























































































































































































































Reviews:

No comments

Related manuals for 8300 Series

D-Link NetDefend DFL-260E Reference Manual preview
NetDefend DFL-260E
Brand: D-Link Pages: 328
D-Link ShareCenter Pulse DNS-320 Quick Install Manual preview
ShareCenter Pulse DNS-320
Brand: D-Link Pages: 2
D-Link DFL-210 - NetDefend - Security Appliance Firewall Registration Manual preview
DFL-210 - NetDefend - Security Appliance
Brand: D-Link Pages: 19
D-Link DFL-M510 Faq preview
DFL-M510
Brand: D-Link Pages: 22
Dahua N300 Quick Start Manual preview
N300
Brand: Dahua Pages: 12
D-Link NetDefend DFL-1600 Quick Manual preview
NetDefend DFL-1600
Brand: D-Link Pages: 23
Paradyne Hotwire 5100 User Manual preview
Hotwire 5100
Brand: Paradyne Pages: 45
Allied Telesis AR725 Quick Start Manual preview
AR725
Brand: Allied Telesis Pages: 22
8level IPG-200 User Manual preview
IPG-200
Brand: 8level Pages: 52
Qlogic Storage Networking (Unified Fabric Pilot) Installation Manual preview
Storage Networking (Unified Fabric Pilot)
Brand: Qlogic Pages: 76
VoiceLine InnoMedia MTA 3328-2R Getting Started Manual preview
InnoMedia MTA 3328-2R
Brand: VoiceLine Pages: 18
LaCie 301297U - 1TB Ethernet Disk XP Embedded Network Attached... Online Manual preview
301297U - 1TB Ethernet Disk XP Embedded Network Attached...
Brand: LaCie Pages: 67
Hama 00176547 Operating Instruction preview
00176547
Brand: Hama Pages: 25
Infoblox Infoblox-250 Installation Manual preview
Infoblox-250
Brand: Infoblox Pages: 16
ADDON ARM8100 Quick Installation Manual preview
ARM8100
Brand: ADDON Pages: 4
EXAGATE SYSGuard 6001 Quick Installation Manual preview
SYSGuard 6001
Brand: EXAGATE Pages: 7
Thecus 1U4600 User Manual preview
1U4600
Brand: Thecus Pages: 148
Infortrend EonStor GS 3000 Series Hardware Manual preview
EonStor GS 3000 Series
Brand: Infortrend Pages: 134

Brands by name

Popular brands

Load more brands