manualshive.com logo in svg

Nortel 8300 Series, Reference Manual, Page: 127 / 220

Share
Download
Nortel 8300 Series Reference Manual Download Page 127

Chapter 4 SMP log error messages

127

System Messaging Platform Reference Guide

 

Message

ntpSyncCallback:corrupt msg

Severity

ERROR

Description

Syncing failed due to invalid module version in message.

Synopsis

N/A

Action

N/A

Message

number of index does not equal size of link list

Severity

ERROR

Description

This message indicates the index number of elements in the policy table differs 
from the size of the link list during the sanity check.

Synopsis

N/A

Action

N/A

O Messages

Message

oframe_alloc: buffer length too long

Severity

ERROR

Description

This message is generated when the length of the IP frame is more than the 
maximum allowed length of the frame buffer size.

Synopsis

Length of the IP frame is too long. 

Action

Contact customer support for further troubleshooting.

Message

Operator type <value> is not supported will be treated as mask.

Severity

INFO

Description

The operators supported for match fields are Equal, greater-than-or-equal, 
less-than-or-equal, not-equal, mask. This message indicates that an 
unrecognized operator has been detected. This may be the result of corruption or 
a missing/insufficient consistency check.

Synopsis

N/A

Action

Try removing or enabling filters on the port, try to delete or create the ACG from 
the port, and check the dump using aclDumpAclTbl() or aclDumpAceList().

Summary of Contents for 8300 Series





























































































































































































































Reviews:

No comments