Nortel 703t, Maintenance And Diagnostics

Page: 93 / 248

January 2007 Using CallPilot Manager to monitor hardware
703t Server Maintenance and Diagnostics 93
Stop versus Courtesy stop
The following two methods of taking a component out of service allow
you to choose how active calls are affected:
Courtesy stop
A Courtesy stop is the recommended way to take the component out of
service only after the component has finished processing an active call.
Courtesy stop is preferred to a regular Stop.
„
If the component is processing a call, the call is not dropped; the
component remains active until the call is finished.
„
If the component is not in use, it is taken out of service
immediately.
Stop
A Stop takes the component out of service immediately, regardless of
whether the component is currently processing calls. All active calls are
dropped. Perform a Stop only when severe problems affecting a large
number of incoming calls occur or if your organization determines a
special need for it.