Nortel 703t, Maintenance And Diagnostics

Page: 62 / 248

Using Windows online diagnostic tools Standard 1.06
62 CallPilot
Using the chkdsk utility
The chkdsk utility checks a specified disk on the server and displays a
status report. It can be run on drives C, D, E, or F. It is an online utility,
but it reduces system performance while it is running.
The chkdsk utility checks for problems at the Windows file system level.
Any problems existing at this level can cause problems for CallPilot.
Even if there are no problems at the Windows file system level, CallPilot
can still be affected by problems at the CallPilot file system level.
Note: A version of this utility, called autocheck, automatically runs
during Windows startup. Output from this utility appears on the blue
startup screen.
Chkdsk utility syntax
The chkdsk utility uses the following syntax:
chkdsk [drive:][path]filename] [/F] [/V] [/R]
Table 10: Chkdsk parameters
Parameter Description
drive: Enter the drive letter of the drive that you want to
check.
filename Enter the names of files to check for fragmentation.
/F Add this parameter to fix errors on the disk.
/V Add this parameter to display the full pathname of
every file on the disk.
/R Add this parameter to locate bad sectors and to recover
readable information.