Nortel 703t, Maintenance And Diagnostics

Page: 58 / 248

Using Windows online diagnostic tools Standard 1.06
58 CallPilot
To run the arp command from Windows
1 Click Start
➝
Programs
➝
Accessories
➝
Command Prompt.
Result: The Command Prompt window appears.
2 At the Command prompt, type arp with the required parameters (for
example, arp -g 200.286.0.32).
3 Press Enter.
Result: The system runs the arp command.
4 Type Exit to exit the Command Prompt window and return to
Windows.
The nbtstat command
The nbtstat command displays protocol statistics and current TCP/IP
connections using NBT.
Nbtstat command syntax
The nbtstat command uses the following syntax:
nbtstat [-a remotename] [-A IP address] [-c] [-n]
[-R] [-r] [-S] [-s] [interval]
Table 8: Nbstat parameters
Parameter Description
-a remotename Lists the remote computer’s name table using its
name.
-A IP address Lists the remote computer’s name table using its IP
address.
-c Lists the contents of the NetBIOS name cache giving
the IP address of each name.
-n Lists local NetBIOS names. Registered indicates that
the name is registered by broadcast (Bnode) or WINS
(other node types).