manualshive.com logo in svg

Nortel 703t, Maintenance And Diagnostics

Share
Download
Nortel 703t Maintenance And Diagnostics Download Page 53

January 2007

Using Windows online diagnostic tools

703t Server Maintenance and Diagnostics

53

Ipconfig command syntax

ipconfig /[ ]

The following flags are available for the ipconfig command:

To run the ipconfig command from Windows

1

Click Start 

➝

 Programs 

➝

 Accessories 

➝

 Command Prompt. 

Result: 

The Command Prompt window appears.

2

At the Command prompt, type 

ipconfig 

<with appropriate 

parameters>

.

Example: 

ipconfig /all

3

Press Enter.

Result: 

The system runs the ipconfig utility.

4

Type 

Exit

 to exit the Command Prompt window and return to 

Windows.

Flag

Description

/?

Displays Help information.

/all

Displays full configuration information.

/release

Releases the IP address for the specified adapter.

/renew

Renews the IP address for the specified adapter.

Summary of Contents for 703t

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands