Nortel 425-24T, Configuration Manual, Page: 50 / 488

50 Chapter 1 About Ethernet Switches 325 and 425
320985-A Rev 01
Download without reset
The download without reset enhancement allows you to download diagnostic and
image software to the switch without the switch performing an automatic reset.
Once the software is downloaded, you must initiate a manual reset to load the new
diagnostic and software images.
For more information, see “Software Download screen” on page 237 and
“download command” on page 316 .
write memory and save config commands
Release 3.6 software provides two additional CLI commands to save the switch
configuration to NVRAM. The
write memory
and
save config
commands
function identically to the
copy config nvram
command.
For more information, see the following:
• “write memory command” on page 286
• “save config command” on page 286
Daylight savings time enhancement
SNTP uses Universal Coordinated Time (UTC) for all time synchronizations so it
is not affected by different time zones. With Release 3.6 software, you can use the
following commands to set the switch to report the correct time for your local time
zone and for daylight savings time:
• “clock time-zone” on page 294
• “no clock time-zone” on page 295
• “clock summer-time” on page 295
• “no clock summer-time” on page 296
• “show clock time-zone” on page 296
• “show clock summer-time” on page 296