Nortel 1002rp, Maintenance And Diagnostics

Page: 116 / 218

Replacing basic chassis components Standard 1.11
116 CallPilot
Replacing the power supply
The power supply is hot-swappable. This means that you can replace the
power supply without powering down the server.
Requirements
Before you hot-swap a power supply, gather the following tools:
„
one flat-blade screwdriver
„
one Phillips screwdriver
„
one antistatic wrist strap
„
the replacement power supply
When to hot-swap the power supply
A green LED indicates that the power supply is working properly. If the
green LED on the power supply module is unlit or red, the module is
failing or has failed. Other indicators of failure are the alarm that sounds
and the power supply module LED on the status display that turns red.
To hot-swap a power supply
.
DANGER
Risk of electric shock
High current inside the chassis can cause severe injury.