Nortel 1001t, Installation Manual, Page: 92 / 124

2-38 Installing hardware
Turning the 1001t Server on
Standard 1.0 Nortel Symposium Call Center Server May 1998
1001t Hardware Installation Guide
Turning the 1001t Server on
Purpose
When all cables are connected for the installation, follow this
procedure to turn on the1001t Server and peripherals.
Turning on the
1001t Server
To turn on the server, follow these steps.
Boot sequence The following is the sequence for the 1001t Server bootup.
Step Action
1 Ensure the modem power switch is On.
2 Turn the monitor power switch to On.
3 Turn the power on at each PC client.
4 Press the server power switch On.
5 Observe the Power-On Self-Test (POST) and initialization
messages as the server boots up.
Stage Description
1
POST messages display.
2 SCSI (or RAID) initialization messages display.
3
Server boots to DOS:
• runs High Memory Test
4 Server boots to Windows NT and displays the login screen.