manualshive.com logo in svg

Nortel 1001t, Installation Manual, Page: 33 / 124

Share
Download
Nortel 1001t Installation Manual Download Page 33

Getting started

1-11

Installation sequence

Standard 1.0

Nortel Symposium Call Center Server

May 1998

1001t Hardware Installation Guide

Installation sequence

Introduction

The diagram on the following page illustrates the installation 
sequence for a typical Symposium Call Center Server 
installation.

Assumptions

In order to perform the installation, this guide assumes the 
following:

•

The Meridian 1 switch is correctly installed, operational, 
and configured for use with Nortel Symposium Call Center 
Server. Refer to the Nortel Symposium Call Center Server 
and M1 Guide.

•

Meridian Mail, if it is used, is correctly installed, 
operational, and configured for use with Nortel Symposium 
Call Center Server.

•

All customer-supplied client PCs are operational and 
running Windows 95, with the Service Pack supplied by 
Microsoft, or have Windows 95 OSR2 installed.

•

The client network is installed and operational. 

Summary of Contents for 1001t





























































































































Reviews:

No comments