Nortel 1001t, Installation Manual, Page: 21 / 124

About this guide xix
Symbols
Standard 1.0 Nortel Symposium Call Center Server May 1998
1001t Hardware Installation Guide
Symbols
Introduction
This section describes the symbols used in this guide.
Symbols You may encounter the following symbols in this manual.
Danger: Warns you of an immediate hazard which, if not
avoided, will result in serious injury or death.
Warning: Warns you of a situation in whi
ch you
may be injured
or equipment may be damaged if instructions are not followed
exactly as stated.
Caution: Alerts you to situations where data may be lost or
damaged, or when productive time may be lost.
Attention: Provides information essential to the completion of a
task.
Note: Describes the secondary results of procedures or
commands, or special conditions under which a procedure or
command must be used.
The server and
the client The Nortel Symposium Call Center Server consists of three key
components: telephony, server, and client. The telephony
component includes the Meridian 1 PBX and its telephones. The
server component consists of the call center server and network.
The client is installed on the supervisor workstations, and
accesses the server over the customer’s LAN.
The following illustration depicts these components.