Nortel 1001t, Installation Manual, Page: 14 / 124

xii About this guide
Overview
Standard 1.0 Nortel Symposium Call Center Server May 1998
1001t Hardware Installation Guide
Overview
Introduction
This guide provides the procedures for installing the hardware
and peripherals for the 1001t Server.
For information on using or administering other tools and
features of the Nortel Symposium Call Center Server
components, refer to the appropriate document. To find out
which document you need, see “Related documents” on page
xvi.
Document sets The following sets of documents are supplied with a
Symposium Call Center Server system:
• Symposium Call Center Server guides
• Intel installation and user guide
• RAID controller guide (if installed)
• Ethernet and (if used) Token Ring network card guides
• modem guide
Who should read
this guide This guide is for Nortel (Northern Telecom) installers and
distributors responsible for installing or upgrading the Nortel
Symposium Call Center Server system.
Assumptions
This guide assumes that you are preparing to install a new
Nortel Symposium Call Center Server.
This guide also assumes the following:
• The Meridian 1 switch is correctly installed, operational,
and configured for use with Symposium Call Center Server.
• Meridian Mail, if it is used, is correctly installed,
operational, and configured for use with Symposium Call
Center Server.