1
LB65R6Z-1
Z-Wave Smart LED
Recessed Retrofi t Light Kit
Fits 5” to 6” Recessed Fixtures
LB65R6Z-1 Z-WAVE SMART LED RECESSED RETROFIT LIGHT KIT
The GoControl™ family of Z-Wave® certifi ed wireless lighting products (smart
LED bulbs, switches, dimmers, outlets, and plug-in modules) and security
devices (alert sounder, passive infrared sensor and door/window transmitter)
bring a new level of intelligent wireless capability to commercial and residential
environments.
The Z-Wave wireless protocol is an international wireless standard for remote
home automation, security and other applications. Embedded in each device,
the Z-Wave smart chip enables two-way RF communication among hundreds
of Z-Wave enabled devices, allowing products and services from multiple
manufacturers to work seamlessly.
The LB65R6Z-1 Smart LED Recessed Retrofi t Light Kit is designed to replace
a conventional incandescent halogen downlight. It is simple to set up and
provides longer life and more energy effi ciency than incandescent or fl orescent
light bulbs. The fi xture is instant on, without the warm-up delay common in
CFL bulbs.
GoControl Z-Wave products are easy to install, and allow dealers to create an
integrated wireless network with nearly limitless expansion and interoperability
with security, energy management, home entertainment, appliances, and more.
As part of a Z-Wave network, the LB65R6Z-1 will also act as a wireless
repeater to insure that commands intended for another device in the network
are received. This is useful when the device would otherwise be out of the radio
range of the wireless controller.
For indoor use only. Retain instructions for future use.
WARNINGS
RISK OF FIRE OR ELECTRICAL SHOCK - DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE - USE IN DRY LOCATION ONLY.
TO PREVENT WIRING DAMAGE OR ABRASION, DO NOT EXPOSE
WIRING TO EDGES OF SHEET METAL OR OTHER SHARP OBJECTS.
DO NOT MAKE OR ALTER ANY OPEN HOLES IN THE ENCLOSURE OF
WIRING OR ELECTRICAL COMPONENTS DURING KIT INSTALLATION.
THIS LAMP IS NOT INTENDED FOR USE AS EMERGENCY LIGHTING.
VAPOR BARRIER MUST BE SUITABLE FOR 194° F (90° C)
THIS PRODUCT IS NOT SUITABLE FOR COVERING WITH THERMAL
INSULATED MATERIAL.
THIS PRODUCT IS NOT SUITABLE FOR MOUNTING ON A
FLAMMABLE SURFACE.
KEEP THE LIT SURFACE A MINIMUM OF 18” (.5 m) AWAY FROM ANY
FLAMMABLE OBJECT
PRINTER’S INSTRUCTIONS:
INSTR,INSTL,LB65R6Z-1; P/N: 10007037 X7; INK: BLACK; MATERIAL: 20# MEAD BOND; SIZE: FLAT 17.000” x 11.000” FOLDED 8.500” x 11.000”; TOL ± .125”; SCALE: 1-1; FOLDING: 5-FOLD ALTERNATE
650 Lumens
Equivalent
to a 65 Watt
incandescent
light bulb
NOTE:
This unit must be added to the Network
only where it will be permanently installed.
The proper operation of this node in the
mesh network is dependent on it knowing its location with respect to other nodes. You cannot “test bench” confi gure this unit, then install.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING
BEFORE INSTALLATION, TURN THE POWER TO THE HOUSING OFF!
