GC2e Wireless Security System | Installation and Programming Guide
©2020 Nortek Security & Control LLC. All rights reserved.
30
2GIG is a registered trademark of Nortek Security & Control LLC.
Programming Question Table
Q#
Programming Question/Sub-Question
Default Setting
Q21 Select Siren Supervision Time (0 to 3)
(0) Disabled
Q22 Enter CS Lack of Usage Notification Time, in Days (0-255)
7 Days
Q23 Enter Radio Modem Network Failure Time (0-255)
30 Minutes
Q24 Select Radio Network Failure Causes Trouble (0 to 1)
(1) Enabled
Q25 Select Radio Modem Network Failure Reports (0 to 1)
(1) Enabled
Q26 Select Auto Stay (0 to 1)
(1) Enabled ‡
Q27 Select Exit Delay Restart (0 to 1)
(1) Enabled ‡
Q28 Select Quick Exit (0 to 1)
(1) Enabled
Q29 Enter Periodic Test, in Days (0-255)
30 Days
Q31 Enter Cancel Time, in Minutes (5-255)
5 Minutes‡
Q32 Select Cancel Display (0 to 1)
(1) Enabled‡
Q33 Select Cross Sensor 47-48 (0 to 1)
(0) Disabled
Q34 Enter Cross Sensor Timeout, in Seconds (10-120)
10 Seconds
Q35 Select Abort Window Dialer Delay (0 to 2)
(1) 30 Seconds‡
Q36 Select Burglary Bell Cutoff (0 to 4)
(0) 4 Minutes
Q37 Select Fire Bell Cutoff (0 to 4)
(0) 4 Minutes
Q38 Enter Time to Detect AC Loss, in Minutes (1-30)
10 Minutes
Q39 Select Random AC Loss Report Time (0 to 1)
(1) Enabled
Q40 Enter CS #2 Phone Number (0-25 digits)
No Default
Q43 Enter Installer Code (4 digits)
1561
Q44 Select Lock Installer Programming (0 to 2)
(0) Disabled
Q45 Select Lock Default Programming (0 to 2)
(0) Default All
Q46 Select Trouble Doesn’t Sound at Night (0 to 1) *
(1) Enabled
Q47 Select Troubles Resound After Holdoff (0 to 7)
(0) Disabled
Q48 Enter Download CSID (6 digits)
000000
Q49 Select Programming Mode Entry Reports to CS (0 to 1)
(0) Disabled
Q50 Select Trouble Reports to CS (0 to 1)
(1) Enabled
Q51 Select Manual Bypass Reports to CS (0 to 1)
(0) Disabled
Q52 Select AC Loss Reports to CS (0 to 1)
(1) Enabled
Q53 Select System Low Battery Reports to CS (0 to 1)
(1) Enabled
Q54 Select RF Low Battery Reports to CS (0 to 1)
(1) Enabled
Q55 Select Opening Reports to CS (0 to 1)
(0) Disabled
Q56 Select Closing Reports to CS (0 to 1)
(0) Disabled
Q57 Select Alarm Restore Reports to CS (0 to 1)
(0) Disabled
Q58 Select Trouble Restore Reports to CS (0 to 1)
(1) Enabled
Q59 Select Bypass Restore Reports to CS (0 to 1)
(0) Disabled
Q60 Select AC Restore Reports to CS (0 to 1)
(1) Enabled
Q61 Select System Low Battery Restore Reports to CS (0 to 1)
(1) Enabled
Q62 Select RF Low Battery Restore Reports to CS (0 to 1)
(1) Enabled
Q63 Select Phone Fail Detect (0 to 1)
(0) Disabled
Q64 Select Smart Test Reports (0 to 1)
(0) Disabled
Q65 Select RF Jam Causes Trouble (0 to 1)
(0) Disabled
Q66 Select Daylight Saving (0 to 1)
(1) Enabled
Q67 Select Daylight Saving Start Month (01 to 12)
(03) March
Q68 Select Daylight Saving Start Sunday (1 to 7)
(2) 2nd
Q69 Select Daylight Saving End Month (01 to 12)
(11) November
Q70 Select Daylight Saving End Sunday (1 to 7)
(1) 1st
Q71 Select System Tamper Causes Trouble (0 to 1)
(1) Enabled
Q72 Select Quick Bypass (0 to 1)
(0) Disabled
Q73 Select Disarming Keyfob After Alarm Alert (0 to 1)
(0) Disabled
Q74 Select Keyfob Arm/Disarm Confirmation (0 to 1)
(0) Disabled
Q75 Select Auto Unbypass for Manual Bypass (0 to 1)
(1) Enabled
Q76 Select Force Bypass Reports (0 to 1)
(0) Disabled
Q77 Select Event Log (0 to 3)
(3) All Events
Summary of Contents for 2GIG eSeries GC2e
Page 2: ......