Norstar Voice Mail 4.0 Set Up And Operation Manual Download Page 91 | Manualshive

Page: 91 / 258

Norstar Voice Mail 4.0 Set Up And Operation Manual Download Page 91

Creating Mailboxes

77

P0886600 Issue 1.0

Set Up and Operation Guide

Adding several User Mailboxes using the Create Mailbox Utility

You can save time by creating mailboxes within a range of DNs by using the Create
Mailbox Utility. When enabled, the Create Mailbox Utility seeks out all user DNs
in a predefined range that have not been assigned a mailbox. Norstar Voice Mail
then creates a mailbox for each DN. The DN range must be entered by the System
Coordinator. The created mailboxes have the following characteristics:

•

the Mailbox number is the same as the DN

•

Class of Service is input by the System Coordinator and will be the same for all
mailboxes created using the Create Mailbox Utility

•

Call screening default is blind (off)

•

the mailbox name is taken from the Norstar DN programing, if it has been
completed

We recommend programing the DN names before using the Create Mailbox
Utility. For more information, refer to the Norstar Installation Guide. If the
Norstar Integrated Communication System (ICS) is not programed, the Mailbox
number is used.

•

Message Waiting notification is enabled

•

the Outdial route is entered by the System Coordinator and is the same for all
mailboxes created using the Create Mailbox Utility

The mailboxes created will be uninitialized and ready for initialization by the
individual mailbox owners.

A mailbox will not be created if:

•

a mailbox of the same number already exists

•

the DN is being used by another mailbox

•

the DN is identified as a Norstar Voice Mail voice port

«
...
89
90
91
92
93
...
»

Summary of Contents for Voice Mail 4.0



































































































































































































































































Reviews:

No comments