Norstar Voice Mail 4.0 Set Up And Operation Manual Download

Page: 169 / 258

Using Norstar Voice Mail (NVM) Manager

155

P0886600 Issue 1.0

Set Up and Operation Guide

To install the Norstar Voice Mail Manager client software from a diskette:

1. Close and exit all other applications that are running.

2. Insert the installation floppy disk you labeled Norstar Voice Mail 4.0

Manager 1 of 1 into the floppy disk drive of the PC.

3. Click Start and select Run.

4. Type a:setup.exe and click OK.

5. Follow the instructions that appear on the screen

6. After the software has been loaded, remove the floppy disk labeled Norstar

Voice Mail 4.0 Manager 1 of 1 from the floppy disk drive of the PC.
Norstar Voice Mail Manager software is now ready to use.

Starting the Norstar Voice Mail Manager client software

To start the Norstar Voice Mail Manager client software:

1. Click Start and select Programs.

2. Point to the Norstar Voice Mail Manager program icon and in the submenu

click on Norstar Voice Mail Manager.

3. The Administration Password screen appears.

The information that appears in the screen below is an example.

4. Enter your Norstar Voice Mail Server Name or IP Address.

5. Enter your System Coordinator Mailbox number and password combination

and click OK.

6. The NVM Manager screen appears.

Summary of Contents for Voice Mail 4.0



































































































































































































































































Search results

Summary of Contents for Voice Mail 4.0

Reviews:

Related manuals for Voice Mail 4.0

Brands by name

Popular brands

Norstar Voice Mail 4.0, Set Up And Operation Manual

Search results

Summary of Contents for Voice Mail 4.0

Reviews:

Related manuals for Voice Mail 4.0

Brands by name

Popular brands