Norstar Voice Mail 4.0 Set Up And Operation Manual Download

Page: 153 / 258

P0886600 Issue 1.0

Set Up and Operation Guide

Changing or Deleting a CCR Tree

Overview

Once your CCR Tree has been created and enabled, you may want to alter it to
reflect changes in your company.

This chapter describes how to:

•

disable a CCR tree

•

remove Caller ID (CLID) numbers from a CCR tree

•

access the Workspace

•

add options to an existing CCR tree

•

change a Menu or Sub-menu

•

change an Information Message

•

change a Leave Message

•

change a Destination Type

•

change a Transfer

•

erase a path on a CCR tree

•

delete a CCR tree

Tools and materials

To have a clear record of the paths and options you intend to change, we
recommend that you first alter the appropriate section of the Norstar Voice Mail
Programing Record and have it handy during the programing changes.

Precautions

Before making changes to a CCR Tree, the tree must be disabled.

Programing diagram for changes to a CCR Tree

The following diagram presents a high level view of the steps needed to change a
CCR Tree.

Summary of Contents for Voice Mail 4.0



































































































































































































































































Search results

Summary of Contents for Voice Mail 4.0

Reviews:

Related manuals for Voice Mail 4.0

Brands by name

Popular brands

Norstar Voice Mail 4.0, Set Up And Operation Manual

Search results

Summary of Contents for Voice Mail 4.0

Reviews:

Related manuals for Voice Mail 4.0

Brands by name

Popular brands