Norstar Voice Mail 4.0, Set Up And Operation Manual

Page: 151 / 258

Building, Saving, and Enabling a CCR Tree
137
P0886600 Issue 1.0 Set Up and Operation Guide
Making a CCR Tree a destination within the Caller ID Table
As mentioned previously, your company must subscribe to CallerID services before
you can use this aspect of the feature and the following steps:
Repeat steps 5 through 9 for each phone number you want to assign to the CCR
Tree.
Testing a CCR Tree
After a CCR Tree is built, saved and enabled, you should test it. Verify the Tree by
calling the company number and testing each Tree Path. Make sure that:
• the Home Menu routes the call as designed
• each transfer routes the caller to the intended DN or mailbox
• each message provides the correct information
• messages are courteous and easy to understand
1. Press
ƒ · ° ‹ .
2. Enter the System Coordinator Mailbox number
and password, then press OK .
3. Press
⁄ ⁄ .
4. Press ADD .
5. Enter the phone number (up to 13 digits) and
press OK .
Each phone number assigned to a table must be
unique.
6. Press OTHR .
7. Press CCR .
8. Enter the Tree number and press OK .
9. Enter the Path number and press OK .
Press
® to end this programing session.
Log:
QUIT RETRY
Admin
MBOX AA OTHR
Call id table
CHNG QUIT
Ph:
RETRY
Destination
TABLE EXT
Destination
MBOX
QUIT
CCR tree:
RETRY
Path:
RETRY