manualshive.com logo in svg

Norstar Voice Mail 4.0, Set Up And Operation Manual, Page: 110 / 258

Share
Download
Norstar Voice Mail 4.0 Set Up And Operation Manual Download Page 110

96

  Mailbox Administration Tasks

Set Up and Operation Guide

P0886600 Issue 1.0

Enabling and disabling the General Delivery Mailbox

The default status for the General Delivery Mailbox is enabled. The General 
Delivery Mailbox can be disabled or enabled as required by your company.

To assign the General Delivery Mailbox:

When enabled, callers who reach the General Delivery Mailbox can leave a 
message. When disabled, callers will hear the Automated Attendant Voice Prompt. 
At any time, callers can press 

‚ to reach the Operator.

Setting up the Operator’s Mailbox

When the Operator is not available, all calls that request the Operator are transfered 
to the General Delivery Mailbox. Your company’s designated Operator should be 
assigned the General Delivery Mailbox number. The DN can be any operating DN 
on your Norstar Voice Mail System that is not already assigned to a mailbox.

To change the mailbox number:

1. Press  

ƒ

  

·

  

°

  

‹ .

2. Enter the System Coordinator Mailbox number 

and password, then press 

OK

 .

3. Enter  

fl .

4. Press  

CHNG

  to toggle the settings between 

Y

  

for Yes, or 

N

 for No.

Press  

OK

 .

5. Press 

® to end this programing session.

1. Press  

ƒ

 

·

 

°

 

‹ .

2. Enter the System Coordinator Mailbox number 

and password, then press 

OK

 .

3. Press  

MBOX

 .

4. Press  

CHNG

 .

Log:
QUIT   RETRY   

Admin
MBOX   AA   OTHR

Gen Delivery:Y
CHNG           OK

Admin
MBOX   AA   OTHR

Log: 
QUIT   RETRY   

Admin

   AA   OTHR

Mbox Admin
ADD   DEL   

Summary of Contents for Voice Mail 4.0



































































































































































































































































Reviews:

No comments