SK155
© NØRSE
3
© NØRSE
English
Push the latch (10e) on the
spray gun (10) to open the
connecting port and insert the
connector of the high pressure
hose (08). Release the latch
(10e) to lock the hose (08) in
place. Check the connection by
pulling on the hose to ensure it
may not be pulled out.
Securely fit the lance extension (20) by turning it anticlockwise and
letting it lock into place.
To remove:
Press the accessory towards the spray gun (10) and turn
it clockwise to remove it.
1. Slide the handle (01) on the
reel frame and fix it with
two screws (25). Tighten the
screws (25) using a suitable
screwdriver.
2. Push the crank (02) into the opening of the reel (09), ensure it
clicks in place.
3. Attach the gun holder (11) to the handle (01) and secure it with
one screw (23).
4. Slide the lance guide (12) onto the support on the main unit and
secure it with the screw (24).
5. Screw the quick connector filter (04) to the water inlet (05).
Quick Start Guide
These steps describe the quickest method to get your pressure washer up and running.
However, it is essential you fully read this manual to ensure you are familiar with the general
safety features, precautions and functions necessary to operate the product. Failure to do so
may result in injury and damage to your washer or personal items.
10e
01
25
02
09
23
01
11
12
24
05
04
08
10f
20
#3
#1
#2
10e
08
31
20 10
22
20
10
