Norland Elite 437A150, Operator'S Manual

Page: 76 / 490

Scanner Preferences Command
The Scanner Preferences selection displays four different tabbed dialog boxes for setting
Site
information,
Scanning parameters, Analysis parameters, and Service Information.
Figure 3-2: The Scanner Preferences selection window
Most of the scanner parameters will be set during installation prior to applications training. Settings will be dis-
cussed with the operator during the training to ensure a complete understanding. The scanner preferences can
be customized to suit each facility’s needs. However, when the needs of the facility change, the system can
easily be reconfigured.
The changed parameters become the default condition for subsequent procedures when they are set from the
Scanner Preferences window. They remain the default settings until changed by the operator.
Operator's Guide
437D140 Rev. I
3-20 Installation and Setup