Norland Elite 437A150, Operator'S Manual

Page: 414 / 490

Routine Maintenance
Detailed routine maintenance procedures are documented next.
Cleaning Scanner Exterior
The scanner exterior should be cleaned with a soft towel moistened (but not soaked) with standard antiseptic
cleaning solution. The scanner should be cleaned as part of the daily cleanup associated with most facilities.
Note: Cleaning solutions must not be sprayed directly onto the scanner - to avoid possible damage to
interior electronic components.
Cleaning Table Top Pad
The pad is made of an antimicrobial material, which inhibits the growth of microorganisms. The pad is secured
by Velcro strips.
The pad can be cleaned with a damp cloth or a mild cleaner such as Windex
®
. Other cleaners may be too abras-
ive. Do not use any product containing bleach.
Note: If the Table Top pad is removed for cleaning, make sure it is re-installed in the same orientation -
patient head rest to the right.
Cleaning Positioning Aids
Clean the vinyl coated positioning aids by wiping them with a standard antiseptic cleaning solution.
Clean the fabric covered leg block with a damp cloth or by removing the cover and dry cleaning.
Cleaning QC Phantom
Clean the QC Phantom with water and a soft cloth.
Caution: DO NOT USE ALCOHOL TO CLEAN THE QC PHANTOM.
Preventative Maintenance Schedule
Norland recommends annual preventative maintenance, performed by Norland trained technicians.
Operator's Guide
437D140 Rev. I
15-2 General Maintenance