Norland Elite 437A150, Operator'S Manual

Page: 368 / 490

Research and Small Subject Techniques
Changing the Scan Parameters Prior to Scanning
If it is necessary to change any of the parameters, click on their values and select another value from the drop-
down list (see figure below). Adjust the parameters as required for your study protocol.
Note: If scan parameter changes are made prior to scanning, they will only apply to the current scan
being acquired. To save the changes as defaults for all scans, or to revert to the default values:
Click the button at the bottom of the Parameters window.
Select Save to store these settings as the new default values, or
Select
Restore
to revert to the previously saved default values.
Click to continue with the scan process.
Operator's Guide
437D140 Rev. I
11-78 Additional Techniques