Norland Elite 437A150, Operator'S Manual

Page: 34 / 490

Scan Reports
Five different types of Reports can be generated for each scan: the
Bone Exam Report
, the
Bone Exam Report
- 1 Page , the Combined Report , the Patient Letter , and the Referral Letter . In addition, the Ten Year Fracture
Risk Report can be generated for Hip Scans (if enabled), and the Body Composition Report can be generated
for Whole Body Scans (if enabled). The next section discusses how to generate these Reports. A discussion of
each Report is also included in this chapter with a sample of each for reference.
Generating a Report
Reports may be generated two different ways:
Follow these steps to generate a Report from Scan Results:
After a scan has been performed, analyzed, and saved, click to generate a report using the cur-
rently selected report template.
Follow these steps to generate a Report from Stamp View or Filmstrip View:
1. Make sure that the scanned image is being viewed as a thumbnail in the Stamp View or the Filmstrip View.
Click (to highlight) the thumbnail view of the scan.
2. Click Tools > Report > Select Template... or click the button to open the “Report Con-
figuration” dialog box.
3. When the Report Configuration dialog box opens, click a Report Template to highlight it ( Bone Exam
Report - 1 Page was selected here). See "Sample Scan Reports" on page 2-17 for examples of the report
template selections. Click .
Note: The selected Report Template will remain the default until it is changed. The currently selected
Report Template is always displayed at the bottom of the IlluminatusDXA window.
4. Click Tools > Report > Generate New or click the button.
Operator's Guide
437D140 Rev. I
2-12 General Information