Norland Elite 437A150, Operator'S Manual

Page: 267 / 490

Operator's Guide
437D140 Rev. I
Scanning Lateral Spine 10-7
Scan Procedures
Checklist
You are almost ready to begin scanning. Confirm that the following tasks have been completed:
the system is running (see "Powering Up the System " on page 4-3)
the System Calibrations are done (see "Daily Calibration Procedure" on page 4-6)
the Database Navigator window is open (Figure 4-3: on page 4-5)
Preparing the Patient for Scanning
Ensure that the patient has removed all items from their pockets and that clothing is free of metal (i.e. rivets, but-
tons, zippers) or anything else that might be of a high density. It might be necessary to have the patient change
to an examination gown or robe. Shoes should also be removed.
Update (or Create) the Patient’s Record
EXISTING PATIENT: From the Database Navigator window, double-click on the existing patient’s name to
open the patient’s record. Update the patient’s information. (If necessary, refer to "Enter Data into the Existing
Patient’s Record" on page 4-24 for instructions.)
You are now ready to begin the scan process.
Proceed with "Setting the Scan Parameters" on page 7-8 to continue.
NEW PATIENT: From the Database Navigator window, click on to start a new record. Enter all
the patient information. (If necessary, refer to "Preparing Patient Records" on page 4-21 for instructions.)
You are now ready to begin the scan process.
Proceed with "Setting the Scan Parameters" on page 7-8 to continue.