Norland Elite 437A150, Operator'S Manual

Page: 142 / 490

System Shutdown
Note: Norland recommends that the scanner be left on overnight or over the weekend. If the scanner
is to remain idle for a week or more, then the system should be shut off.
The system should be backed up daily, before shutting down. See the backup procedure "Quick Reference
Guide - System Backup for Windows 7" on page 15-4 for instructions.
The following shut down routine will help ensure consistent system operation.
1. From the Database Navigator window, click on File > Exit to exit and close the Illuminatus software.
2. Confirm that the software has been closed before performing the next step.
3. Turn the scanner OFF by depressing the power switch located on the lower inside right panel.
Figure 4-16:
Power Switch location
4. Shut down the computer by clicking the Windows Start button and selecting Shut Down or Turn off the Com-
puter to perform the normal Windows shutdown procedure.
5. Turn off the monitor and the printer.
Operator's Guide
437D140 Rev. I
4-34 Basic Operation