Norland Elite 437A150, Operator'S Manual

Page: 105 / 490

Operator's Guide
437D140 Rev. I
Installation and Setup 3-49
Table Limits
This setting is accessed by clicking Tools> Service Tools > Table Limits.
The "Table Limits" command is a diagnostic function that allows operators to redefine table limits if the arm was
bumped during operation (thus losing a step) or if Technical Support requests operation during troubleshooting
efforts. It moves the scanner arm to the origin position and to the opposite corner to define the scan area. A dia-
log box opens warning the operator that the table dimensions will be found and the patient should be kept out of
the way. The operator has the option to continue or cancel the operation.
Caution: Ensure that Scanner Arm path is clear of obstructions when using this feature.
Note: WHAT TO DO: Click on Tools > Service Tools > Find Origin. The following alert box opens:
Click to continue. The scanner arm will redefine the table limits.