DETAIL A
Parts List
DESCRIPTION
PART NUMBER
QTY
ITEM
Bunk Pan, KD, Titan 80 X 36
037-T001-XX
1
A
Bunk Pan, KD, Titan, Family Bed Bottom, 80 X 36
037-T002-XX
1
B
Bunk Pan, KD, Titan, Family Bed Extension 83 X 18.5
037-T003-XX
1
C
Steel End Frame, Titan, Family Bed
036-T102-XX
2
D
Steel End Frame Leg, Family Bed Extension
036-T002-XX
2
E
Headboard, Short
030-T006-XX
1
F
Footboard, Short
030-T007-XX
1
G
Headboard, Short, Family Size
030-T008-XX
1
H
Footboard, Short, Family Size
030-T009-XX
1
J
Bracket, Side Rail, Short
029-T006-XX
4
K
Side Rail, Short, HPL
030-T010-XX
2
L
Side Rail, Tall, HPL
030-T011-XX
2
M
Bracket, Side Rail, Tall
029-T005-XX
4
N
Bracket, Titan, Center, HPL Bed Rails
029-T007-XX
4
P
Standard: Screw, 1/4-20 X 3/4" L, BH, Cross, Female
021-108
20
Q
Security: Screw, 1/4-20 X 3/4" L, BH, S-Torx, Female
021-119
20
Q
Washer 5/16 Split (Zinc / Black)
025-011 / 025-030
24
R
Nut, 1/4-20, Centerlock
025-018
5
S
Standard: Screw, 5/16-18 X 1.5 L, Btn Hd, Hex Skt Cap (Zinc / Blk)
021-101 / 021-102
40
T
Security: Screw 5/16-18 X 1.5 L, Btn Hd, Torx Pin (Zinc / Black)
021-116 / 021-007
40
T
Washer, Flat 11/32 ID X 3/4 OD x .050 (Zinc / Black)
026-006 / 025-031
74
U
Standard: Screw, 1/4-20 x .75 L Recessed Hex Skt Cap, (Zinc / Blk)
021-107 / 021-115
25
V
Security: Screw, 1/4-20 x .75 L Torx Pin, (Zinc / Black)
021-077 / 021-062
25
V
Hex Bit 3/16"
071-014
1
W
Titan Family Bed
Assembly Instructions
Model Number
TNT1991
Page 1 of 4
Rev. C - 3/20/14
091-752
Assembly Notes: Norix is not responsible for any damage due to improper installation. If your shipment does not match the parts list, please contact Norix Customer Service at 800-234-4900.
Norix reserves the right to modify design specifications at any time without an obligation to owners of previously sold products.
www.norix.com TEL 800 234-4900
Tools Needed
Low RPM Variable Speed Drill
3/16" Hex Driver OR T-40
5/32" Hex Driver OR T-27
Driver Extension
Philips Head Screwdriver
7/16" Wrench
B
D
A
Leave (3) open holes
at top for Headboard.
Determine whether bed is to be left or
right hand. See bottom of page 4 for
finished assembly illustrations. Steps 1
thru 4 are the same for either left or
right hand versions.
1. Lay out End Frames and Pans on
sides as shown. Bottom Pan (B) has
holes for Extension, facing upward in
the illustration. Leave (3) holes open
at top of End Frame for attaching
Head/Foot boards in a later step.
Use Screw (T), Lock Washer (R), and
Flat Washer (U) as shown, (2) each per
corner of each pan.
Fasten hardware securely.
Use 2nd & 3rd
holes from
bottom.
Holes for
Extension.
T
R
U
