10
Operation
lights go out. The length of the charging process depends on the
charge level of the battery.
The radio can be operated during the charging process.
Operation
Turning OFF and ON
Press and hold the ON/OFF button (4) until the device turns on. The
device is now in standby, the time is displayed and changes after a
few seconds in the power-saving mode. Another short press of the
button turns the device on.
When the device is on, press the ON/OFF button (4) briefly to put
the device into standby mode. Press and hold the button to turn the
device off.
Delayed turning OFF
By repeatedly pressing the SNOOZE/SLEEP button (14), you can
set a time after which the device turns itself off. This may be 120,
80, 60, 45, 30 or 15 minutes. Wait until the desired value stops
flashing and ‘SLEEP’ is shown on the display. Briefly pressing the
SNOOZE/SLEEP button (14) displays the remaining time for a few
seconds.
To switch off the function, press the SNOOZE/SLEEP button (14)
repeatedly until after ‘OFF’ is shown in the display. When the
display stops flashing, the function is turned off.
Adjusting the Time
When in standby, press and hold button (7) until the hour display
flashes. Adjust the hour with buttons (11). Press button (7) again
until the minutes flash. Adjust the minutes with buttons (11). Finish
adjusting the time by pressing button (7) and holding it down until
the time is permanently displayed.
Adjusting the Volume
You can regulate the volume with the loud/quiet buttons (12).
