Nordson Vulcan Jet, Customer Product Manual

Page: 19 / 172

Description
2-1
Part 1126187_05 E
2021 Nordson Corporation
Section 2
Description
Overview
This manual describes the installation and use of the Nordson Vulcan Jet™
dispensing system. When necessary, the reader is referred to the
documentation supplied with other Nordson products or products supplied by
third parties.
The Vulcan Jet dispensing system liquifies solid‐form polyurethane reactive
(PUR) hot melt adhesive contained in 30‐cc cartridges and maintains the
adhesive at the desired temperature. When the system is activated, it uses
compressed air and jetting to dispense adhesive as a series of joined dots
onto the surface of a product or into a product feature, usually in a small to
mid‐sized electronics assembly application. The system includes:
S
the Vulcan Jet controller
S
the Vulcan Jet applicator
S
a remote air treatment and muffler assembly (hereafter referred to as
the pneumatic kit)
S
a Nordson Corporation or customer‐supplied robot for use with the
Vulcan Jet controller and applicator (optional)
5
4
2
1
3
Figure 2‐1 Vulcan Jet dispensing system
1. Vulcan Jet controller
2. Air filter
3. Pneumatic Kit
4. Applicator
5. Robot (Nordson Corporation
robot shown)