Powder Pilot
™HD
P/No.7192721_02
Page | 31
PUMP CONTROLLER CONFIGURATION
This screen appears after pressing the symbol on the booth configuration screen.
Pump controllers calibration values are displayed in groups of 4 gun on each page.
The user has to select the correct group
referring to the appropriate guns.
Exit screen
Write screen
1 2 3
4
5
1
–
pump calibration value A
–
enter the calibration value “A”
written on the label sticking at the
manifold for gun 1
2
–
pump calibration value B
–
calibration value “B” is always 0
3
–
pump calibration value C
–
enter the calibration value “C” written on the label
sticking at the
manifold for gun 1
4
–
Gun group
–
the actual group of guns is selected by using the pull down menu here
5
–
Gun number
–
calibration values for pump controller of gun number 4
