Installation
B 3-1
Part 1022914G03
E
2007 Nordson Corporation
Section B 3
Installation
WARNING:
Allow only qualified personnel to perform the following tasks.
Follow the safety instructions in this document and all other related
documentation.
Suitable for installation in Zone 1, Zone 2, or normal usage areas.
Mounting and Connections
See Figures B 3-1 through B 3-5. Follow all safety instructions.
WARNING:
Install the pump according to all local codes and ordinances.
Failure to do so is dangerous and could result in loss of agency approvals
and voiding of Nordson warranties.
WARNING:
If any component of the high pressure fluid system has a
maximum working pressure less than the pump’s, install a pressure relief
valve in the hydraulic system set to open at that component’s maximum
working pressure. This will protect against equipment rupture and personal
injury.
WARNING:
The pump must be securely grounded, using the strap and
clamp provided. An ungrounded or poorly grounded pump can store an
electrostatic charge that can give personnel a severe shock, or arc and
cause a fire or explosion.
WARNING:
Static electricity is created by the flow of high pressure fluids.
Use only grounded fluid hoses with continuity between fittings. Failure to
use grounded hoses could result in a fire or explosion.
