Standard System Configuration
3-33
Part 1056418-07
E
2019 Nordson Corporation
Trace
This button is grayed out unless a Nordson engineer or CSR is logged in. It
opens a diagnostic screen that can be used for troubleshooting a system.
Program Shutdown
The shutdown and reboot procedures shut down all running processes in an
orderly sequence and prevent file corruption. Use the Shutdown button to:
S
shut down the iControl program and access the operating system tools
and utilities.
S
shut down and reboot the iControl program and the operating system
when you make a change that requires a reboot.
S
shut down the iControl program and operating system before you turn
off power to the console.
CAUTION:
Do not turn off console power without first performing a
complete shutdown. Repeatedly doing so could corrupt the iControl
program and operating system on the program card or the user data on the
user data card.
1. Touch the
Shutdown
button on the System Configuration screen.
2. See Figure 3-31. The iControl Shutdown Confirmation screen appears.
Touch the
OK
button to confirm that you want to shutdown the iControl
program. Touch the
Cancel
button if you change your mind.
OK
Cancel
Figure 3-31 Shutdown Confirmation Screen
When the iControl program shutdown is complete, the operating system
desktop appears, with the Shutdown dialog shown superimposed on the
desktop:
Summary of Contents for Encore iControl 2
