Nordson cp, Product Manual

Page: 62 / 83

Parts
7-14
Part 104373 − 03
E 2015 Nordson Corporation
Common Hydraulic Section Parts
See Figure 7-4. These parts are used on all pump versions.
Version-specific parts are listed on the following pages. Refer to Service
Kits on page 7-21 for kit part numbers and contents.
Item Part Description Quantity Note
1 249297 Chamber, solvent 1
2 249315 Plunger, hydraulic, stainless steel 2
3 - - - - - - Gland, packing assembly 2 A, B
4 249291 Housing, hydraulic 2
5 983007 Washer, flat, 0.531 x 1 x 0.063 in., zinc 8
6 983180 Washer, lock, split, 0.5 in., steel, zinc 8
7 981354 Screw, hex head,
1
/
2
− 13 x 2.25 in., cap, zinc 8
8 900002 Ball, 440 stainless steel, 1.125 in. dia, 100 2 C
9 - - - - - - Seat, ball 2 C
10 954015 Ring, back-up, single, 1.375 in. 4
11 - - - - - - O-ring 2 A, C
12 - - - - - - O-ring 2 A, C
13 249289 Manifold, suction 1
14 973408 Plug, pipe, socket, standard,
1
/
2
in. NPT 2
15 983051 Washer, flat, 0.344 x 0.688 x 0.065 in., zinc 4
16 983150 Washer, lock, split,
5
/
16
in. 4
17 981353 Screw, hex head,
5
/
16
− 18 x 1.125 in., cap, zinc 4
18 972102 Connector, male, 37,
7
/
8
− 14 x
1
/
2
in. NPT, stainless
steel
1
19 - - - - - - Seat, ball 2 C
20 - - - - - - O-ring 4 C
21 900000 Ball, 440 stainless steel, 0.375 in. dia, 50 2 C
22 246021 Cage, ball 2 C
23 246022 Spring, compression, 0.75 x 0.375 x 0.02 in. 2
24 - - - - - - O-ring 2 A, C
25 249305 Cartridge, ball check 2
26 249308 Manifold, check valve 1
27 - - - - - - Fitting,
3
/
8
in. NPTF, w/O-ring 1 A
28 - - - - - - S O-ring 1 A
NOTE A: See version-specific hydraulic section parts lists on page 7-16 for part numbers.
B: Service kits available for solvent-borne, solvent EPR, waterborne, and abrasive resistant waterborne
packing glands. Refer to Packing Gland Service Kits on page 7-21.
C: Included in hydraulic seal (pages 7-23 and 7-23) and ball check (pages 7-23 and 7-25) service kits.