Nordson cp Product Manual Download Page 21

Page: 21 / 83

Installation

3-1

Part 104373

−

2015 Nordson Corporation

Section 3

Installation

WARNING:

Allow only qualified personnel to perform the following tasks.

Follow the safety instructions in this document and all other related

documentation.

Suitable for installation in Zone 1, Zone 2, or normal usage areas.

Mounting and Grounding

1. Mounting slots are provided in the upper and lower heads. Install the

pump in an area accessible for operation and maintenance. Use four

hex head

-in. bolts to mount the pump to the wall or to a vertical

stand. See Figure 3-1 for mounting slot pattern.

WARNING:

To prevent static electricity build-up, ground the pump, all

system components, and the waste container. Ungrounded components

could cause a fire or explosion.

2. Connect the pump to a true earth ground, using the ground strap and

clamp provided.

(16.75 in.)

AIR MOTOR

UPPER HEAD

AIR MOTOR

LOWER HEAD

FLOOR

(57 in.)

1450 mm

(4.75 in.)

120.6 mm

425.5 mm

Figure 3-1

Mounting Slot Pattern

Summary of Contents for cp




















































































Search results

Summary of Contents for cp

Reviews:

Related manuals for cp

Brands by name

Popular brands

Nordson cp, Product Manual

Search results

Summary of Contents for cp

Reviews:

Related manuals for cp

Brands by name

Popular brands