Nordson AltaBlue, Customer Product Manual

Page: 92 / 234

Service
7-5
Part 1120130 E
2011 Nordson Corporation
Changing the Material Type
1. Run the melter until empty.
2. Determine whether the new material may be mixed with the old material.
S
May be mixed: Remaining old material can be flushed out using the
new material.
S
May not be mixed: Thoroughly purge the unit with a cleaning agent
recommended by the material supplier.
NOTE: Properly dispose of the old material according to local regulations.
Detaching the Exterior Panels
Open the protective panels with a 4 mm Allen key.
On the inside
Fan and Air Filter
The air filters must be cleaned (knocked out) or replaced, depending on dust
accumulation.
Refer to Section 9, Parts , for the filter part number.