Nordson 303 779B, Customer Product Manual

Page: 30 / 176

Installation
A 4-2
E
1998 Nordson Corporation
All rights reserved
303 779B
Issued 11/98
Manual 12-44
Use these steps to remove the shipping pallet.
1. See Figure A 4-1. Remove the shipping bolts (3) which hold the oven
to the shipping pallet.
2. Position the forklift forks under the oven to lift the oven only. With the
oven facing you, the forklift position (2) should be just to the right of
the pallet channels (1).
3. Lift the oven off of the pallet with the forklift.
4. See Figure A 4-2. With the oven on the forklift, screw in the leveling
pads (1, 2, 3, 4, 5, 6) provided.
CAUTION: Turn off the forklift and lock its wheels and fork
cylinders. Failure to follow this instruction may cause personal
injury.
5. Make sure that leveling pads 3, and 4 are screwed in as far as
possible, and that pads 1, 2, 5, and 6 are adjusted to be exactly
7.5-cm (3-in.) below the base of the oven.
NOTE: Shorter ovens may not require leveling pads 3 and 4 in which
case you may disregard any reference to those pads.
1244005A
1
2 3
4 5
6
Fig. A 4-2 Leveling Pad Locations
3. Removing the Oven’s
Shipping Pallet