manualshive.com logo in svg

Nordson EFD 2+2-XCH-V3, Operating Manual

Share
Download
Nordson EFD 2+2-XCH-V3 Operating Manual Download Page 39

To create a program file:

1.  At the PICO controller, create a blank TXT file as follows:

a.  Insert an SD card into the SD card slot on the front of the PICO controller in the correct orientation (see the 

symbol on the controller).

b.  Select DOWN-/UPLOAD > UPLOAD.
c.  Choose the root directory, “.”

A file named “PDA2_Default.txt” is created on the SD card.

NOTE:

 A blank TXT file template that can be edited on a PC is available on the provided SD card. You can use this 

file as an alternative to creating a blank TXT file at the PICO controller.

2.  Remove the SD card and transfer the program file to a PC.

3.  On the PC, use Microsoft Notepad to open the TXT file. For correct representation of the TXT file, use the 

following settings:
•  Page Setup: landscape

•  Font: Lucida Console

•  Font Style: Regular

•  Font Size 10, Western scripts

4.  Fill the program file with parameters. Refer to the following sections for detailed information:

•  “Control Programs” on page 38

•  “Characteristics of a Control Program” on page 40

•  “Program Examples” on page 41

5.  When the program file is complete, continue to the next procedure to transfer it via SD card to the PICO 

controller.

To transfer a program file to the PICO controller:

1.  Insert the SD card that is loaded with the control program you want to transfer into the SD card slot on the front 

of the PICO controller in the correct orientation (see the symbol on the controller).

2.  From the Main Menu, select Down-/Upload > Download and then select the file to be downloaded.

3.  Press Enter.

If “Download Successful” appears after this step, all parts of the *.txt control program were properly transferred to 
the PICO controller.

Download errors are clearly indicated in a notification on the PICO controller display. Refer to “Troubleshooting” on 
page 50 for details about error messages.

 Program Cycles, Program Files, and Factory Settings (continued)

PICO Controller 2+2-XCH-V3

39

www.nordsonefd.com   [email protected]

   +1-401-431-7000    Sales and service of Nordson EFD dispensing systems are available worldwide.

Summary of Contents for 2+2-XCH-V3





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands