background image

3

AMOUNT OF CHARCOAL/BRIQUETTES

DANGER OF CARBON MONOXIDE POISONING

!

Recommended amount of charcoal:

1,5kg

Maximum amount of charcoal:

1,8kg

Recommended amount of briquettes:

1,8kg

Maximum amount of briquettes:

2,2kg

       WARNING! 

Never overfill the grill with charcoal/briquettes, as it may damage the grill enamel if 

glowing charcoal falls from the charcoal grate and toward the grill body. 

Glowing charcoals may also fall out of the ventilation opening and cause fire or material 

damage when overfilled.

Damage caused by incorrect use is not covered by the warranty.

GENERAL ASSEMBLY TIPS

Before assembling:

 

● Carefully read the assembly guide for the grill. Follow the instructions and safety instru

-

ctions.

 

● Lay out all the parts and tools to make them easy to reach. Check all parts off against 

the list.

 

Check that no parts are hidden in the packaging. Do not throw away the packaging 

before you have found all parts and the grill is fully assembled.

 

Take your time!

 

● We recommend that two people assemble large grills to make it easierto keep parts in 

place during assembly.

During assembly:

 

● For å unngå spenninger, monter først alle deler løst sammen. Når alle deler er montert 

sammen kan alle skruer strammes til.

Grills with hinged lids:

 

● Assemble the frame and wheels first.

 

● Attach the grill to the frame.

 

● Fit the side table, lid and hot shelf last.

Summary of Contents for NAPOLI 57













Reviews: