Nordic ID Group
| Joensuunkatu 7 | FI-24100 Salo | Finland
358 2 727 7700 | Fax + 358 2 727 7720 | [email protected]
32 / 38
2020-05-18
Nordic ID HH83/HH85
User Guide
Version 1.3
2.6.
ENTERPRISE MOBILITY MANAGEMENT (EMM)
The Nordic ID HH83/HH85 supports the Android Enterprise Management framework, which enables
using EMM (Enterprise Mobility Management) and MDM (Mobile Device Management) solutions.
These solutions provide an administrator (a person or a company) with remote management features such
as device monitoring, device reporting, remote data wiping, mobile application management or access
management. In a company-owned deployment scenario, the enterprise owns and fully controls the
devices its employees or customers use.
The first step to enroll a Nordic ID HH83/HH85 on an EMM platform is to provision the device, which is
a standard procedure in every Android device. You must provision the device owner mode of operation
during the initial setup of a new device or after a factory reset. Device owner mode can't be provisioned
on a device at any other time.
The provisioning process binds a device to an enterprise and sets a device up for management.
1.
Before enrolling a device, the administrator creates an enrollment QR code with a management
console or similar application in the EMM platform. This QR code contains an enrollment token
and all the information that’s needed for Android Device Policy to provision a device.
2.
On a new or factory-reset Nordic ID HH83/HH85 device, the user (typically an IT admin) taps
the screen six times in the same spot. This triggers the device to prompt the user to scan a QR
code.
Screenshot 13
3.
The user scans the QR code using the barcode scanner (imager).
4.
The EMM app will be copied into the managed profile in Nordic ID HH83/HH85 and the user
will be able to use it to enroll the device.
