APPLIANCE
Rev. 01 of 01/07/2019
Translation of the original instructions in Italian
SOLL.
2
GENERAL WARNINGS
The appliance is intended fro use in a professional environment.
After removing the packaging, make sure that the equipment has not been
damaged. If it has, inform the dealer or the installer immediately.
Before positioning and installing the appliance, check that the power and
voltage data for the power supply indicated on the CE plate (Fig. 4.1)
correspond to those available in the place where it will be installed (see
chapter 4).
In the event of malfunction, turn the appliance off and disconnect it
completely.
The appliance can be installed, commissioned and maintained only by
installers or technicians that are qualified or authorised by the
manufacturer.
To guarantee safety while installing, using and performing maintenance
on the appliance, it is recommended to carefully read the instructions
given in this manual and to keep the document in a place where it can be
easily consulted by the user.
48
