Nordcap 406600899, Service Manual

Page: 17 / 67

17
LIBERO LINE FRY TOP INDUCTION
2 INSTALLATION AND COMISSIONING
The following chapters are intended only for authorized technicians / engineers
2.1 GENERAL INSTALLATION
All the non-standard or out-of-standard situations should be reported on the commissioning form and duly
documented for future reference.
2.1.1 UNPACKING AND POSITIONING THE EQUIPMENT
2.1.2 ROOM REQUIREMENTS
To guarantee continuous operation, the room temperature range must be between 5°C and 40°C .
Outdoor functioning is strictly allowed only if the machine can be protected against any conditions being out of
the above temperature range and against any atmospheric agents.
On a hot cupboard base take precaution to install a baffle for preventing hot air to reach the oven fresh air
intake; this could create malfunctioning.
High room humidity may cause water to condensate on electric components hence causing short circuit.
2.1.3 LIMITATIONS
Induction appliances: to guarantee continuous operation at maximum power, the room temperature must
be below 40
℃
.
2.1.4 LIST OF POSSIBLE INSTALLATION SOLUTIONS
Hereinafter, the instructions for the main installation possibilities. The different accessories have a dedicated
Installation Manual; please refer also to these documents provided with the accessories or available on PRIDE.
2.1.4.1 ON BASE / REFRIGERATED BASE
All top appliances can be fixed onto bases.
WARNING / CAUTION !
Before any operation on the machine read Chapter SAFETY INFOR-
MATION/PRECAUTIONS . We recommend for any phase involving the removal of
the packaging to use cut-resistant gloves