Nordcap 406600891, Service Manual

Page: 23 / 76

23
LIBERO LINE HOB INDUCTION
2.1.4.3.1 DIMENSIONS & AIR REQUIREMENTS
The appliance is predisposed for an air inlet conveyor that is not supplied with the appliance. Minimum air
intake slot to be arranged on the furniture is 3000MM²; if a sufficient cool air intake cannot be assured to the
appliance there could be generated an overheating alarm message notification, refer to §
ALARM CODE LIST
Please refer to the Installation and Operating Manual of this accessory for further installation instructions.
All documents are available for authorized technicians on the web sites (PRIDE-SERVICE PORTAL- AGELUX
etc..) In case of any doubt, refer to your local country customer care.
Here is an example image of the conveyor installed.
NOTE !
The sponge gasket, fixing assembly and air conveyor are not supplied with the drop-in appliance,
they are accessories and must be ordered separately.
In case you intend to “self-make” an air conveyor, it is strongly recommended to keep the possibility
for a quick access to the intake air filters for ordinary maintenance.
AIR CONVEYOR